High Performance Blood Pressure Monitor - ICU electric hospital bed DHC-II(FO03) – VinnieVincent

1. Specification:
1.1. Overall dimension: 2280 * 1120 * 420 / 780;
1.2. Dorsum adjustment: 0-75 ° ± 5 °;
1.3. Leg adjustment: 0-37 ° ± 5 °;
2. Headboard / tailboard:
2.1. It adopts high-quality original ABS engineering plastic, which is integrally injection molded, with beautiful appearance, reliability and durability;
2.2. Built in metal reinforced structure, plug-in design, convenient disassembly, equipped with safety hook;
2.3. The outside of the head and tail of the bed is equipped with an anti-collision angle. The anti-collision angle wheel can be replaced separately, which can effectively prevent the hospital bed from colliding with the wall during movement. The four anti-collision angles are equipped with oxygen cylinder bracket hanging holes;
2.4. The bed tail plate is provided with a transparent acrylic head card slot;
3. Bed board:
3.1. High quality cold rolled steel sheet with thickness of 1.0mm shall be adopted;
3.2. Four bed boards, each of which is a die, stamped into a concave shape at one time, with multi pore design, which is easy to breathe and has anti-skid function;
3.3. The bed surface is molded with stiffeners, which not only improves the load-bearing, but also increases the beauty;
4. Bed frame:
4.1. It is welded with 60 * 30 * 1.2mm high-quality seamless cold-rolled steel pipe;
4.2. The welding adopts Japanese OTC welding robot technology, with high welding quality and solid bed;
4.2. Bed load ≥ 240kg;
5. Guardrail:
5.1. Two large and two small ABS guardrail design, up and down turnover structure design;
5.2. The lifting device adopts the anti pinch damper device to control the speed and noise. It can be hidden under the bed panel and flush with the bed panel;
5.3. The front and rear guardrails are equipped with ball angle display, which can clearly display the lifting angle of the back bed board and the inclination angle of the bed body; A 30 degree scale mark is set on the guardrail to clarify the angle of 30 degrees raised by the back, which can effectively assist clinical VAP pneumonia;
6. Coating:
6.1. The surface of the bed is coated with Dutch Akzo Nobel Powder and electrostatic powder, which can prevent Staphylococcus cross infection;
6.2. The automatic spraying line adopts German Jinma spray gun to make the coating more uniform and free of bubbles;
6.3. The surface of the machine body is frosted and sprayed to make the products more beautiful and high-grade;
6.4. The complete process and imported powder can ensure that the product will not rust for 10 years, resist acid-base corrosion and fade;
7. Lifting system:
7.1. Linear controller: the large icon button operates the back, knee and other body positions, and can be fixed in the groove of the front guardrail, which can be operated freely. When there is no operation, the linear controller can be locked automatically to avoid misoperation.
7.2 high quality silent medical motor is adopted, with stable speed control, low noise, long service life, safety and reliability;
7.3 the guide rod system adopts high carbon steel and high-strength aluminum platform, and two-way pole overload protection screw rod;
8. Casters:
8.1. Adopt special 5-inch high-quality silent universal casters (diameter 125mm), built-in high wear-resistant self-lubricating bearings and high-quality wear-resistant wheel body, which can effectively prevent foreign matters such as hair from winding, operate flexibly without noise and have good stability. Each caster bears an independent load of ≥ 80kg;
8.2. The central control braking system is adopted, with high quality and good rust prevention effect;
9. Mattress:
9.1. The overall dimension is matched with the hospital bed, with a thickness of 80mm;
9.2. Medical special mattress, which meets the functional requirements of multi position hospital bed and can be folded;
9.3. The inner layer is made of high-density sponge and Hainan coconut palm board. The palm board is required to be pressure formed by Hainan coconut palm silk at one time. The palm silk is sterilized at three times with high temperature, no insects, good elasticity, air permeability, antibacterial and anti-corrosion;
9.4. The outer layer is made of waterproof and wear-resistant cloth, which has the characteristics of waterproof and breathable, mildew proof, bacteria proof and insect proof;
9.5. The jacket is equipped with a pull lock, which can be removed flexibly and easy to clean. Waterproof cloth shall be adopted for the cloth;