Wall mounted soap dispenser is a common soap dispenser. It is usually hung on the wall and is convenient to use. Its installation methods include perforated installation and non perforated adhesive installation. Select the appropriate installation method according to the needs. Generally, there are many installation without punching to avoid damaging the wall. The installation position of the wall mounted soap dispenser should be considered. It is better to install the soap dispenser 30 cm from the left or right of the washing table, and it is better to install it on the wall near the shower in the bathroom. The position where you can press your hand is better. Let’s learn how to install wall mounted soap.
1. Punching installation
It is the traditional screw drilling installation method. This installation method is relatively firm, but there is no requirement for the wall, which will cause certain damage to the wall. During installation, select the appropriate drilling position, drive the screws into the wall, and then install the rubber plug; Then hang the back plate, tighten the nuts, hang the wall mounted soap dispenser on the back plate and fasten it.
2. Hole free installation
The hole free installation is generally adhesive. The advantage is that it does not damage the wall, and it is relatively simple. It can be installed by itself. The disadvantage is that there are certain requirements for the wall. When the wall is not installed, wipe it clean, stick the screws to the wall, discharge the bubbles, and then hang the soap dispenser on the back plate and stick it on the screws of the screw paste.
Post time: Jul-03-2023
